Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
R
rsmith11_421e51
3 Posts
0
29116
May 13th, 2008 16:00
MD1000 connection issues
I have a PowerEdge 1850 connected to a MD1000 PowerVault. The PowerVault has 15 1TB drives, one HotSpare, with two RAID 5 groups. The server is running Windows Server 2003.
This morning I received the following error message:
"An enclosure management module (EMM) has been removed". The error logs then precede to say that all physical disks have been removed, then a minute later, all disks were "added" again, along with the EMM.
After a reboot of all systems, the Windows server found the drives again.
Has anybody seen these errors before?
rsmith11_421e51
3 Posts
222
0
Posted May 13th, 2008 17:00
Yes, I am running all those versions.
Dev Mgr
6 Operator
•
9308 Posts
•
3 Points
222
0
Posted May 13th, 2008 17:00
- MD1000 firmware: A04
- PERC5E firmware: 5.2.1-0066
- PERC5E driver: 2.14.0.32 or 64 (32 for x86 and 64 for x64 Windows)
If you're not on these, that would probably be a good first step.
The raid adapter driver and firmware can be found under the Poweredge 1850 downloads in the SAS Raid Controller section ( here).
The MD1000 firmware can be found under the MD1000 downloads under system firmware.