UNSOLVED
U
user_87d4d9
1 Rookie
•
11 Posts
•
2 Points
0
159
February 6th, 2026 15:24
Precision 7510 power issue
Hi,
Today into the workshop landed a PMW7510 with an odd power issue: it won't power on when off, and when coaxed into life, it then won't power off via a button, either the onboard or e-dock one.
AC power or battery makes no difference.
I've flashed the BIOS to the latest off the website
Windows shutdown just restarts the PMW
Once running everything thunders along quite happily.
Throw stuff at me, see what I've missed ;) ;
(edited)
Unplug the system and remove the base cover. Disconnect the main battery from the mainboard and hold the power button for 30 sec.
Remove and reinstall the memory modules and the storage drive.
Reassemble and see if the issue is resolved.
user_87d4d9
1 Rookie
•
11 Posts
•
2 Points
0
0
Posted February 6th, 2026 15:37
@ejn63
Thank you, but alas that didn't do it.
I tried 30seconds on each power button too.Disconnect the battery and see if the system will power up reliably on AC power only. If it does, the battery is likely the issue.
If it does not, it's likely there's a fault with the system board, which will need to be replaced.
user_87d4d9
1 Rookie
•
11 Posts
•
2 Points
0
0
Posted February 8th, 2026 15:07
@ejn63
That didn't do the trick either.
I'm pretty much resigned to a new motherboard. I've stripped it of everything else (drives, daughter cards, down to 1 stick of RAM, no keyboard etc) and still no joy.
It's a shame because, other than the insistence that it wants to live, everything else is absolutely fine. (Maybe I should call the board (HAL9000 ;) )