I used to be able to just put a few pages in the paper feeder, and press Scan on the machine. Then it would scan the pages one by one and I could save the files as a PDF on my computer.
Recently, it stopped responding. I tried reinstalling software, drivers, the whole bit. It still gives me this error message when I try to scan a document from the All In One Center Software that came with the AIO 962 Printer, as well as I have installed the new updated version off of the Dell website.
I am still able to print from this computer and any computer on the network.
Can anyone help me with this message?
"Scan was not successful
Try these solutions:
- Make sure the All-In-One is powered on.
- Disconnect and reconnect the USB cable.
- Disconnect and reconnect the All-In-One's power cable.
- Restart your computer."
Then it has a Troubleshooting button. The troubleshooting tree doesn't help one bit and absolutely has no clue as to what the problem is. It asks me completely irrelavent questions.
I have made sure the AIO was powered on, I have disconnected and reconnected all of the cable, and I have restarted my computer.
Right click on the AIO 962 Printer icon adjacent to the clock on your taskbar. Left click on "Change Dell Photo AIO Printer 962 Scan Button Applications". When the "Edit Scanning Application List" window opens, what is your default scan application? If none, then click the "Enhanced Search" button. When the "Add new applications" Window appears, the new applications will be shown in the right hand pane. Existing applications in the left hand pane. You can add any of the new applications by highlighting it and then clicking the "<-- Add". Note: Add only those applications that are obviously applicable such as Microsoft Photo Editor, Jasc Paint Shop, Microsoft Word, Adobe Reader, etc. My scan listed applications that I wouldn't even think are applicable, such as Winzip, HijackThis. Click the "Done" button when you finish adding appropriate applications. When the "Edit Scanning Application List" window reappears, highlight the program you wish to be your default scanning program, and click on the "Set as Default" button. Click close. Restart your computer, see if the scan buttons now work.
Note: Pressing the scan button on the AIO 962 will not automatically open the scan program unless the "Dell Printer Solution Center - Dell Photo AIO Printer 962" is running, evidenced by the icon on the taskbar.
I have no icon present. I have looked all over for any thing resembling the actions you said, and have found nothing. All the AIO software and the 962 Printer drivers are installed correctly.
Ok. There's the rub. Click Start|All Programs|Dell Printers|Dell Photo AIO Printer 962|All-In-One Center. When the All-In-One Center window opens, the printer icon; i.e., "Dell Printer Solution Center - Dell Photo AIO Printer 962" icon should appear on your taskbar. Now, go to the printer. Be sure the Mode is set to Scan. Press either the Color or Black "Scan/Copy/Fax" button. A window should pop up on the bottom right of your screen showing the scan progress to your default scanning application coming through the "Dell Photo AIO Printer 962 - USB port".
I suspect that the Dell USB port monitor is not loading at startup. The program name and location is:
Normally, this program loads via the registry. Click on Start|Run. Type
msconfig. Press Enter. Click on the Startup tab and see if
dlbxmon.exe is listed. If so, is it unchecked; i.e. disabled?
Simple solution would be to create a shortcut to the
dlbxmon.exe program in the Start|All Programs|Startup folder. That way it loads when Windows starts up.
If you have a personal firewall program installed; i.e., Norton or McAfee Internet Security, you might try turning off the firewall and doing a reinstall of the software from the Dell Photo AIO Printer 962 CD.
Also, I have seen AOL 9.0 SE prevent full installation of printer software.
The dlbxmon.exe was disabled.. even after i enabled it, restarted computer, it doesnt work. there still is no Icon that appears even after i open the All in One Center. i guess im out of luck is what it sounds like.. running out of solutions?
it would be a lot easier if Dell offered support without having to have all these service tags and service expirations just like anyone else who offers 24/7 tech support FREE via telephone instead of redirecting me to forums constantly.
well just for future reference i have always found the online tech chat more helpful..sometimes a little less time consuming...that is if you're still under warranty- i am not!
No luck at all. Sat on hold for close to an hour, over 45 minutes, waiting for a response on the Dell Support telephone line. Waited for the gentleman to come back and tell me if he had found a resolution, when he came back, he had nothing I had not already tried or been told previously.
nickmock
27 Posts
350
0
Posted December 5th, 2007 19:00