First of all PudgyOne, thank you very much! Your posts helped me 2 years ago with my Dell AIO 922 printer running with mixed environment of XP and Win7 computers.
Now we have just 3 Win7 laptops in the house, all recent machines. The strange thing is, the Dell Inspiron I just bought is the one that I cannot get to work. Right now, I just want to get it running when directly connected via USB cable. I used your procedure above to the letter, many times with every variation I can think of. I used the R166239 CleanUp utility - which takes 30+ minutes, but does seems to remove all the 922 printer files and drivers. Then installed the R151379 (Vista 64 bit) driver package as directed - in Vista SP2 compatability mode.
I get thru the procedure and all seems hunky-dory until I try to print the test page from the printer properties dialog. It tells me I have a communication problem and suggests I enable bidirectional support. Unfortunately, this option is greyed out in the dialog. This is the end result each time I try. Also, I notice that the driver version from Printing Preferences/Help/About is 1.0.5.2. On my successful laptop (Sony Vaio) I used the same R151379 driver file, but ended up with version 1.0.6.1.
I can't make any sense of this. Any suggestions would be very welcome!!
Download the Vista 32-bit drivers for Windows 7 32-bit or the Vista 64-bit drivers for Windows 7 64-bit. Install the Vista drivers in the Vista Compatibility mode You'll get a message, the printer is not connected. Connect the printer at this time(powered on).
1. Open the McAfee Security Center and then click on the ‘Internet and Network’
2. To the right of ‘Internet and Network’ you would see all the services that are present under it, just below that you would have a button ‘Configure’ please click on that.
3. Now you would have the Internet and Network Configuration, in this window you would have an option ‘Firewall Protection in Enabled’ to the right of that you would have a downward arrow, click on that.
4. Then click on the ‘Advanced’ button which would have a new screen up.
5. To the left of that window you would have ‘System Services’ click on it and to the right pane of the window you would have the ports listed.
6. Please check the option which is for ‘Windows File Sharing’ then click on ‘Apply’ and then ‘Ok’
I enabled the TCP 137 to 139 (netbios) and 445 in addition to what mcafee had. I thought that would do it. Ran thru the whole clean and install process a couple more times, including removing the USB devices.
I'm still getting the exact same result. Unable to communicate and it suggests I should enable bidirectional support - which is greyed out. This result has been very stable. I must have something simple that is wrong. Once again, my other win7 64 bit laptop prints from direct USB connection just fine.
Yes, checked windows/system32/spool/printers or whatever as given in the link. There was nothing there. Checked several times. Never seemed like things were getting stuck in the spooler.
Yes. Yes. Each time you give the same process and I have followed patiently and exactly. It's not working. There must be something else. Scanning works.
Do you know if R151379 is the only Vista 64 driver for the AIO 922?
This install package gives me vers 1.0.5.2. The same install package gave me 1.0.6.1 on my other win7 laptop that prints fine. Strange, right?
When you installed the Vista 64-bit drivers, did you install them in the Vista SP2 Compatibility mode ?
Download the System Information Tool If using Vista/Windows 7, the tool needs extracted. Once extracted, right click on sysinfo and run as administrator.
If using XP, double click on the tool, then double click on sysinfo.
Allow this past your virus program and post the information back here.
You mention different systems, are you printer sharing on a host computer?
After you right clicked on R151379, left clicked on, properties, compatibility mode, vista SP2, then clicked ok.
You right clicked on the R151379, then left clicked run as administrator
Did the file unzip and just sit there?
If yes, then look for the setup file. Left click on, properties, compatibility mode, vista SP2, then click ok.
Right click on the setup file, then left click run as administrator.
I suggest running delete print jobs in case the test print job is stuck in the queue. If it's not there, then it may not be necessary. A stuck print job will allow yhou to go through the uninstall/reinstall steps but the same problem will still be there.
Disconnect the printer from the computer.
Run the patch.
Restart the computer. Make sure the printer was removed.
Start, control panel, device manager.
Go to the USB Controller section and click the + sign.
Starting at the bottom, USB Root Hubs, and working your way to the top, USB Universal Controllers, un-install everything in that section.
Restart your computer. Windows will find everything again and correct the problem one. Please be patient. The new hardware wizard may work 3-5 minutes before it's done.
Now install the Vista 64-bit drivers in the Vista SP2 Compatibility mode.
PudgyOne
11 Legend
•
30315 Posts
•
106638 Points
450
0
Posted April 29th, 2012 17:00
IndyBB,
First, how is the printer connected, to a host computer or some type of wireless print adapter?
Make and model of the problem computer and operating system. 32-bit or 64-bit?
Operating system in English or another language?
What virus program and firewall is on the computer?
What virus program and firewall is on the host computer?
Rick