UNSOLVED
Print Spooler 922AIO
I recently downloaded a new driver for my Dell 922AIO Printer. However, my Inspiron 5160 does not seem to be recognize the printer. The following message pops up when I try to print something: " The print spooler is not running" When restarting the computer I have also received the following message: "Spooler subsystem app encountered a problem and needed to close." I have reinstalled the printer software several times and the same thing keeps happening. Does anyone have any ideas how to solve this problem? Thank you.
.
.
If you have a Vista machine, you MUST use the patch to remove the printer, then restart the computer.
Also check printers and faxes. Make sure the printer is online.
Also check this
Start, run or press the Windows Key and the R key at the same time.
Type
services.msc
hit enter
look at the Print Spooler. Make sure it's set for automatic. Also restart the service.
PudgyOne
11 Legend
•
30315 Posts
•
106638 Points
242
0
Posted August 19th, 2008 22:00
Please try it this way.
Disconnect your printer. Download and run this patch to completely remove the printer from your computer.
Restart your computer.
Download the proper drivers
XP Drivers
Vista 32-bit Drivers
Install the proper drivers. You'll be prompted when to connect your printer.
Scanning
Scanning using USB connection, open the Dell All-In-One Center, click on scanning and copying and scan from there.
Scanning wirelessly, use the scan buttons on the printer.