Solved!
Go to SolutionL
Letbetterp
2 Intern
•
196 Posts
0
1542
June 1st, 2016 14:00
RPA with one drive failure support replace node? Workaround
I have a gen4 rpa 4.0 sp2 with drive bay1 failure and support is sending me a node "really"
Is there a workaround for me to replace drive from replacement node?
Cant you go into raid bios and re-mirror drive?
brettesinclair
2 Intern
•
715 Posts
829
1
Posted June 1st, 2016 15:00
I've been through the same thing. Seems odd for something so easily replaced, but it's the way it is.
forshr
2 Intern
•
1126 Posts
829
0
Posted June 1st, 2016 15:00
This is not a supported FRU option for the Gen4 and requires a whole RPA replacement.
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: +44 (0) 7730 781169
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw
EMC Europe Limited
Registered in England with Company No. 00990752 Registered office address: Level 1, Exchange House, Primrose Street, London C2A 2EG
The information contained in this e-mail message and any files transmitted with it are confidential. It is intended only for the addressee and others authorised to receive it. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, you are advised that you have received the e-mail in error; please delete it and notify the sender immediately. You should not retain the message or disclose its contents to anyone. Any disclosure, copying, distribution or action taken in reliance on the contents of the e-mail and its attachments is strictly prohibited.