UNSOLVED

coaster101

updated

19 years ago

C

coaster101

19 Posts

0

14706

June 16th, 2007 16:00

UNMOUNTABLE_BOOT_VOLUME

I was recommended here from the CD/DVD devices area.

I turned on my computer today to find the blue screen of death stating "UNMOUNTABLE_BOOT_VOLUME"
 
I have a Dimension 4500 desktop computer
 
I've tried running the chkdsk /r command and it freezes at 10%
 
Apparently I need a new hard drive but I'm completely lost here. I don't know which one to buy or how to go about installing it.
 
Any help would be greatly appreciated.


Could I use this hard drive?
http://www.bestbuy.com/site/olspage.jsp?skuId=5524373&type=product&productCategoryId=pcmcat107700050004&id=1051826249503

  • ejn63

    11 Legend

    87468 Posts

    321253 Points

    341

    0

    Posted June 16th, 2007 17:00

    Yes, that drive will work fine.
  • coaster101

    19 Posts

    341

    0

    Posted June 16th, 2007 18:00

    Do I need to buy a second cable or anything or will putting it in the second slot work?
     
    Thanks for all the help!
  • coaster101

    19 Posts

    341

    0

    Posted June 16th, 2007 18:00

    So I would buy it, take the old one out, then how would I go about transferring files from the old hard drive to the new one?
  • ejn63

    11 Legend

    87468 Posts

    321253 Points

    341

    0

    Posted June 16th, 2007 18:00

    Once you've reloaded Windows, connect the failed drive in place of your CD/DVD drive. Then see what you can read - if the drive isn't too far gone, you may be able to recover some or all of your data.

    If you can't read the drive at all, you'll then have to weigh the cost of data recovery.

    I would strongly suggest buying an external hard drive and a copy of Acronis True Image for making backups in the future. The cost is low (as little as $100), far lower than data recovery (which can easily run $2,500+).
  • shesagordie

    12 Elder

    46017 Posts

    341

    0

    Posted June 16th, 2007 18:00

    coaster101

    First, you replace the failed hard drive, with the new drive, reload windows, install all the updates, etc, and after the system is working to your satisfaction, install the failed drive as the secondary and see if you can transfer the files to the new C:/ drive.

    Bev.







    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
  • coaster101

    19 Posts

    341

    0

    Posted June 16th, 2007 18:00

    I'm confused, do I connect the new hard drive and reload windows, or do that with the failed drive (I don't think I can do that since I can't get past the blue error screen)
  • shesagordie

    12 Elder

    46017 Posts

    341

    0

    Posted June 16th, 2007 19:00

    coaster101

    There should be no need to buy a second IDE data cable.

    This Manual may help.

    Bev.








    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
  • coaster101

    19 Posts

    341

    0

    Posted June 16th, 2007 21:00

    Alright, I bought this:
     
    But it's not big enough to fit disks... Will I have to use the old hard drive for reading disks or can I use an external drive I recently got for burning, etc.
     
    Thanks. (new learner)
  • coaster101

    19 Posts

    341

    0

    Posted June 17th, 2007 01:00

    Alright, I've re-installed windows and the new hard drive, and I inserted the old one into the open bay. I connected it with the grey connector.
     
    The computer recognizes it as disk drive "E", when I go to click on it, it asks if I want to format it. When I press OK, it goes on to a window that gives me several options, after pressing ok, it asks if it is sure I want to delete all files/data on the disk.
     
    All I need to recover are "My Documents"
     
    Any suggestions?
  • shesagordie

    12 Elder

    46017 Posts

    167

    0

    Posted June 17th, 2007 03:00

    coaster101

    You do NOT want to format the second E:/ hard drive, formatting will erase all the data, including My Documents.

    Go to My Computer, right click the E:/ drive, click Open and select Documents and Settings and you should find My Documents files and folders. Open it and right click the file or folder and drag it to the new hard drive's My Documents.

    You can only transfer files, all programs and applications must be reinstalled from their disks or from the publisher's website.

    Bev.







    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.