Hello. I'm new to Dell and have some questions using my Poweredge R710. The server has the default PERC 6/i Raid Controller. I just bought a new HDD Hard Drive from Seagate (6TB Exos). I already know that the PERC 6/i does not use hard drives larger than 1TB so I also bought a new PERC H700 to install it into the server. My questions are now:

1) Which cables do I need for the H700 to connect it?

2) Does the Exos Series work with the H700. I already get a 1810 Error (Hard Drive Fault. Please review and clear SEL)

Thanks for all responses.