UNSOLVED
CIFS migration from celerra to VNX
We have a Celerra on 5.6 DART code.
We want to migrate the CIFS data from this Celerra to a VNX.
I read a Celerra CIFS to VNX migration guide using replicator. However, it requires 6.0 code on the Celerra and we do not want to perform this upgrade.
Will emcopy work fine copying data from a Celerra to VNX?
Rainer_EMC
6 Operator
•
8645 Posts
474
0
Posted August 28th, 2012 02:00
Yes emcopy will work fine
I strongly suggest reconsiderung the upgrade though – migration with Replicator is a lot less work – especially when you also just replicate the CIFS config via VDM
Rainer
etaljic81
1000 Posts
474
0
Posted August 27th, 2012 09:00
Yes it will