UNSOLVED
Insufficient storage space in storage pool to create replication checkpoints.
I'm running the Replication wizard on our primary VNX5200 and when I get to the "Select Source" screen where it wants you to input a replication session name I get the error listed in the title.
The Storage Pool has a total capacity of 13TB and shows 8TB free. I even created an additional LUN that has nothing in it to see if selecting that from the drop down list would make a difference, but it doesn't.
Any ideas?
588
0
Posted October 27th, 2016 15:00
I actually was able to get it to replicate.
I don’t know why, but I created the file systems on the 2nd SAN not realizing the replication setup will do that automatically.
I’m currently replicating one of the NFS datastores, but it’s definitely taking it’s sweet time. Only 1.9TB and both SAN’s are hooked up via 10Gb.
Chris Conlan| IT Systems Engineer
Communications Engineering Company (CEC)
588
0
Posted October 27th, 2016 15:00
If you don't have any luck with an OE upgrade, it's not very hard at all to setup replication via the CLI. We can help you figure out the syntax if you can provide a few details.
588
0
Posted October 28th, 2016 01:00
It works both ways...you can initiate the replication from the source vnx which will auto create the FS on the replica vnx or you can create a new FS on the replica and just sync it...However for the latter, you need to make sure you select similar attributes like the primary FS.
Rainer_EMC
6 Operator
•
8645 Posts
588
0
Posted October 27th, 2016 14:00
check if you are running the latest VNX OE - if not the release notes for the latest version could provide info
other idea would be to do a knowledgebase search