‎VNX 5500 Hard Specs | DELL Technologies

Start a Conversation

UNSOLVED

chjatwork

updated

12 years ago

chjatwork

2 Intern

•

356 Posts

5397

April 17th, 2014 12:00

VNX 5500 Hard Specs

Hey,

I have a VNX 5500 which includes DPE, DAE for 2.5" disk and DAE for 3.5" Disk, 2 x CS, and a DataMover. I need full hardware specs for all the chassis. I am also looking for all the possible license software/modules available for the VNX 5500. Please send any links to documentation or websites that can provide this information. As I have to fill out a spread sheet with the following information found below.

I dont know if this will help but this is the current versions of the file and block OE

Current Versions:

File: 7.1.56-5

Block: 05.32.000.5.015

Table … CFSAN VNX Software

*Software*	*Version*

Table … VNX Licenses

*Software*	*License Details*
Clustering	Included in purchase

Table …VNX Hardware

*System*	*Platform / OS*	*CPU Type / Speed*	*RAM*	*Hard Drive*	*DVD / CDW*	*Voltage*	*Pwr Conn*	*Watts*	*BTU*	*Install Space / Location*

Thank you,

E
etaljic81
1000 Posts
3941
0
Posted April 17th, 2014 12:00
Spec sheet: https://www.emc.com/collateral/software/specification-sheet/h12014-vnx5100-5300-5500-5700-7500-ss.pdf
Also, see attached images
AU
Anonymous User
457 Posts
2239
0
Posted April 18th, 2014 02:00
Hi,

You may also refer to the below mentioned links:

http://www.emc.com/collateral/software/specification-sheet/h8514-vnx-series-ss.pdf

http://www.emc.com/collateral/hardware/specification-sheet/h8919-vnx5500-f-unified-stor-ss.pdf

Regards,

Suman Pinnamaneni
C
chjatwork
2 Intern
•
356 Posts
2239
0
Posted April 18th, 2014 05:00
How do I find out what software I have enabled if i can not get a hold of my EMC rep? Is there a command I can type at the CLI to find out or a path I can take on the Unisphere UI?

Thank you
E
etaljic81
1000 Posts
2261
0
Posted April 18th, 2014 06:00
All-flash vnx
E
etaljic81
1000 Posts
2239
0
Posted April 18th, 2014 06:00
In Unisphere, click on System. On the right-hand side click on System Properties and select the Software tab
C
chjatwork
2 Intern
•
356 Posts
3963
0
Posted April 18th, 2014 06:00
But I don't see info about the CS hardware and the datamover hardware properties?
C
chjatwork
2 Intern
•
356 Posts
2261
0
Posted April 18th, 2014 06:00
I am not sure what the VNX 5500-f is, but I figure its not the same as the VNX 5500?
C
chjatwork
2 Intern
•
356 Posts
2381
0
Posted April 18th, 2014 06:00
Ernes,

I am guessing the DM and the CS dont have a processor? I thought at least the DM has a processor?

Thank you,
E
etaljic81
1000 Posts
2239
0
Posted April 18th, 2014 06:00
You first link is not for VNX5500. Your second link is for the VNX5500-F array.
C
chjatwork
2 Intern
•
356 Posts
2239
0
Posted April 18th, 2014 06:00
I actually found the answer to this:

Click on "System" on the top menu,

Click on "System Properties" on the right side menu under System Management.

VNX 5500 Hard Specs

Dell Support Resources

Latest Solutions

I need a laptop to get a job and get my GED and go to college online

Fixed an issue with the Dell OptiPlex displaying no video from the onboard graphics after the driver installation.

I have lost my KM2223W KEYBOARD DONGLE WHAT SHOULD I DO NOW I WANT USE IT FOR MY WORK

BIOS Admin Password Locked - Need Master Code -6FF1

Help with reactivating account