UNSOLVED

ohwell8

updated

18 years ago

O

ohwell8

17 Posts

0

6099

May 18th, 2008 22:00

Computer / Printer Conflict ?

At this point I am so frustrated with Dell and I have had several Dell computers and have had many friends buy Dells at my suggestion.  So, with that said here's the problem and this is not a new problem.

 

My Dell 926 AIO printer works fine when you copy, scan, etc.  However, when you send it a print command from the Dell computer using Vista it may or may not print.  When it does not which is often, the document gets stuck in the queue and the only way to get it out is to go to the spooler, stop it, restart it, hope for the best, or unplug the computer from printer, electrical, etc., or restart the computer.

 

I have talked to the people at the Printer group and they all want to try the same things over and over and over and of course they never work.  And as it has happened on other occasions, today's guru suggested that the printer is okay (I agree since it will perform other functions) and that I should... drum roll please... I'm sure you have heard it... uninstall the Operating System and reinstall.  This I'm not ready to do for a lousy printer.  Another suggestion he had was to disable the Firewall when printing.  I'm not a computer expert by any means but this seems a little odd.  Let's say you are printing, as I was this morning, one copy of a document, change the document, print it again, change, print it again, etc., etc... why would the Firewall not conflict with all of them instead of just one or two or three... 

 

 

So guys and gals... what else could I try.   Advice appreciated in advance.

 

 

  • Sofu

    984 Posts

    681

    0

    Posted May 19th, 2008 01:00

    Have you tried the printer on another computer (after installing a driver of course)?
  • ohwell8

    17 Posts

    681

    0

    Posted May 19th, 2008 11:00

    No, I haven't tried that although the Philipino, Indian, Pakistani, or whatever nationality he was did suggest that.  Yes, I guess I should go to that trouble.  It is irritating though to have to do this with a system that is less than 6 months old.  I feel like packing computer, printer, and peripherals up and shipping them back to Dell.  Their Service is not good.
  • Sofu

    984 Posts

    681

    0

    Posted May 19th, 2008 15:00

    Assuming you got the computer and the printer at the same time, did the printer work properly at the beginning?

     

    If the problem developed recently did it start after installing a new program?

     

    I think it is important to try the printer on another computer.

  • ohwell8

    17 Posts

    681

    0

    Posted May 19th, 2008 22:00

    Thanks for the reply.  The problem has been around for 3 or 4 months.  I do not use the printer that often but like most users, when I want to print I would like for the equipment to work without having to go through several unnecessary steps to get an end product... a printed page.  I have no idea if the problem started after loading another program.  I very seldom download other programs and can't remember if I have or not since I've had this computer... probably so but not sure.  I'm going to try it on my old computer tomorrow and see what happens.  The process is really a pain in the old a... unnecessary in my opinion, totally.
  • Sofu

    984 Posts

    681

    0

    Posted May 20th, 2008 03:00

    Checking DELL Technical Support's Drivers and Downloads for the 926 AIO printer (when connected to a computer running Windows Vista-32 bit) I found the following:

     

    Dell - Patch / Upgrade 9/7/2007

     

    Dell - Firmware 1/6/2008

     

    Are you up to date with these?

    Message Edited by Sofu on 05-20-2008 05:17 PM
  • ohwell8

    17 Posts

    681

    0

    Posted May 20th, 2008 09:00

    I will check and see.  However, when the several techs took control of the computer they uninstalled, reinstalled, etc., etc... drivers... but worth a peek.
  • Sofu

    984 Posts

    681

    0

    Posted May 20th, 2008 16:00

    Talking to DELL is your best option at this stage. Your cooperation with DELL Support staff has been admirable.:smileywink:
  • ohwell8

    17 Posts

    681

    0

    Posted May 20th, 2008 16:00

    Well, tried it on another computer.  Although some print pages did in fact stick in the queue I was able to clear them by just cancelling that particular document in the queue... can't do that on the subject computer.  I did get a message about 10 times... error indicating a close down... dlcxpswx.exe... which I assume is the printer.  Error reports sent to MS but which trash can they went in who knows.

     

    Came back to my computer, rehooked the printer and second document I tried which was from Notepad failed and is now stuck in the queue and will not move and I cannot print.

     

    So, that's the latest.  I'm going to try to call Dell again after lunch and talk to someone other than the printer group. 

  • ohwell8

    17 Posts

    682

    0

    Posted May 20th, 2008 17:00

    Well thanks but not sure about the admirable part... I get rather hot when talking to these people who want me to do the same thing some other person asked me to do the day before or day before that, etc., etc.  Oh well.

     

    Anyway, just printed a few documents but when I tried to print from Notepad or Wordpad the program quit so I had to go to the spooler, stop, restart, etc.,etc.  Thought this may be helpful to you or anyone else following this thread.

     

    I'll post again after I talk to Rangoon or Manila or Bangkok or whatever. 

  • Sofu

    984 Posts

    523

    0

    Posted May 20th, 2008 18:00

    Try replacing the USB to USB cable from printer to computer with a new high grade one - taking care to push the connectors fully home.