I have a new Dell XPS 420 with Vista Home Premium installed. In the interest of saving power, when leaving the computer for a hour or so, I have put it in the sleep mode. When returning to use computer I press the blinking power button and the screen comes to life. On more than one occasion I am greeted with a small screen that says "USB Device not recognized. One of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For further assistance in solving this problem, click this message" The problem I have is that the mouse does not work, so it is impossible to click the message. I usually have to shut off power at the power strip and start all over again, which I know is not good for the computer. Has anyone else had this problem? What steps do I take to prevent this from happening again? The mouse is an infared type and plugs into an USB type plug. Can anyone help me? Thanks.
The usual way of waking the computer from sleep mode is to press the mouse button or press a key on the keyboard. I don't recommend waking it by pressing the power button. Are you pressing the power button because pressing the mouse button doesn't do anything? If so , then you will go to Control Panel, Hardware, Device Manager. Under Mice, open the settings for your mouse and under the power management tab, "Allow the computer to turn off this device to save power" should not be checked, and "Allow this device to wake the computer" should be checked.
This started on mine very recently. I could not find a proper answer to stop from this happening. So I went into power options, on the left pane choose "change when computer sleeps" here on put the computer to sleep-I have chosen "never".
Now I know I am not saving power but I do not need to stop and restart the computer as you have mentioned.
njs1, I tried to go to Mouse the way you described but when come to the Device Manager, I am stuck. Perhaps one has to be loged on as administrator to access as what you have described. The way you described and I reach the mouse and I cannot see "power management" under mouse!!
Would you mind elaberating If I had missed something? Thanking you
snow
Dimension 9200 Intel ViiV Core 2Duo E6400 Processor 2.13GHz 1066 MHz 2MB Windows XP media Centre Edition 2005 now VISTA OS 32bit Memory:2048 MB Dual DDR2 533 MHz [2x1024] Dell Wireless Bluetooth Keyboard & Mouse Dell Wireless Bluetooth Video Card: 1GB nVidia GeForce 7950 GX2 Dual graphics card Sound Card Sound Blaster X-Fi Xtreme music BIOS 2.5.3 Intel 82801 HR/HH/HO SATA RAID controller Intel Matrix Storage Manager v7.6.0.1011 Chipset v.8.1.1.1013 HL-DT-ST DVD +/- RW GSA-H31N HL-DT-ST DVD-ROM GDRH10N Hard Drive: 640 GB [2*320GB]SATA stripe RAID 0 Media Card Reader 13-in- 1 internal
On my computer (I am the only user, the administrator), I click on Device Manager and the box pops up that Windows needs my permission to continue, and I click continue. Device Manager appears. Then I have "Mice and other pointing devices" on the list, I click the plus sign next to that, then see "HID compliant mouse" and double click it, then I see the "Power Management" tab.
I have had (and continue to have) this problem with my BT355 module in my vostro 1700 with Vista Business. Same symptoms described. I think it's a USB and Vista issue. For me the problem is real hassle as I often put my vostro into sleep. Oh and yes I use a BT mouse :) The support at dell sent me a new BT 355 module, but this didn't solve it. My own workaround is to put the vostro back to sleep and then re-waken it. Cludgy, but reliable. I look forward to seeing if SP1 fixes this!
I also have the same problem when waking from sleep. A pop-up says two usb ports not recognized. A reboot solves the problem. MS Knowledge Base Article ID 941996 addresses this issue. It basically says "live with it" until they find a solution in a future Service pack update.
njs1
1 Rookie
•
140 Posts
918
0
Posted February 23rd, 2008 04:00
The usual way of waking the computer from sleep mode is to press the mouse button or press a key on the keyboard. I don't recommend waking it by pressing the power button. Are you pressing the power button because pressing the mouse button doesn't do anything? If so , then you will go to Control Panel, Hardware, Device Manager. Under Mice, open the settings for your mouse and under the power management tab, "Allow the computer to turn off this device to save power" should not be checked, and "Allow this device to wake the computer" should be checked.