Search Results (1.2K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Relevance
OP DVD Zetten????
alles op
de computer gezet en met het programma windows moviemaker bewerkt, maar nu
krijg ik het dus met geen mogenlijkheid op een dvd gebrand die ik dus kan
afspelen in een dvd speler! het is me dus wel gelukt om hem als een bestandje
op een dvd te branden, maar dat kan ik dus alleen op de
Question
•
Desktops General - Locked Topics
TV-out op ATI Radeon X800XT reageert niet op DVD speler
Ik heb de TV als uitbreiding van het bureaublad gedefinieerd, welke
ook wordt herkend. Tijdens het opstarten van de PC zie ik het script op het videokanaal
Front Y/C van de TV voorbijkomen, totaan het bureaublad. Dat blijft dan verder
staan, zonder de op het
Question
•
Desktops General - Locked Topics
Powerconnect Switches and Op Manager
Hello,
Is there anyone out there that is using Dell Powerconnect switches and
Op Manager from ManageEngine? I have a Powerconnect 6248 Stack and 2
powerconnect 2848 switches and would like to monitor them inside OP
Manager.
I currently have
Question
•
Networking General
What to do when OP asks for help but does not mention pc model
check OP previous discussion (if there is one) to find out model
OP sometimes starts a new discussion assuming community already know
his pc
instead of telling OP “we cannot help if you do not tell us your pc
model”, check history.
If this is
Question
•
Optiplex Desktops
dell op 780 4GB Ram
hi everyone, i had an problem with upgrade the ram of dell op 780 , it was
1GB*2 and i won upgrade to 6 gb ddr3 i buy 4 gb sandisk 10600 cl9 and after
fixing ram and start up pc show beebs. are there an update for moterbord? or i
have to change ram?
Question
•
Desktops General - Locked Topics
OP asks for help but does not mention pc model, what to do
check OP previous discussion (if there is one) to find out model
OP sometimes starts a new discussion assuming community already know
his/her pc model
instead of telling OP “we cannot help if you do not tell us your pc
model”, check
Question
•
Inspiron Desktops
Mijn computer start op met een error
Mijn computer start nu steeds op met deze code: x300 PRO 128MB BIOS P/N
133-A33405-100
Het gebeurde allemaal zo, Ik was normaal bezig met mijn computer muziek
aan het downloaden enz. en toen viel hij plots uit met die code. Wat kan ik er
aan doen?
Question
•
Desktops General - Locked Topics
Install Op Sys on replacement Latitude XT hard drive
get a bootable CD with either Windows XP or Windows
7 software.
If I cannot boot from the external CD then what are my options for
getting the Op Sys installed on the new drive?
All help gratefully received with many thanks.
Question
•
Storage, Drives & Media
SCSI op code 9e not supported error
Can anyone shed some light on why I am getting "SCSI op code 9e not
supported" errors constantly on my Celerra CX3-10? I've noticed these errors
when I upgraded our VMware infrastructue from 4.x to 5.x but the errors don't
seem to be affecting anything and I am not experiencing any
Question
•
Celerra
Community Accepted Solution
Here's a dooosy...About SSD SSHD and mSATA installation with OP System
install windows 7 Alienware disk I have then upgrade the
drivers.
Then AFTER OP System install...SINGLE DRIVE ONLY DURING INSTALL OF OP
SYS.
Install the other two drives the SSHD 1 TB and the mSATA 1TB,
How can I make these
Question
•
Alienware General - Locked Topics
Closed
OP 3000 & OP 3080 have Intermittent Connection Issues with Network Device
any stones
uncovered.
We are having an issue with intermittent connections issues with a
network device on several OptiPlex 3000 and OptiPlex 3080 computers. For what
it's worth the network device is a PAX 300s credit card terminal.
Everything was working with
Question
•
Optiplex Desktops
OP system lost - Help
but none of them helped. I finally
got it where it wouldn't even start up. I decided to reload from factory
settings using the DataSafe Restore option on the Recovery Menu. It formatted
the partition but then never went anywhere. It just sat for hours. I finally
just powered it off. I can start
Question
•
Windows General
inspiron 6000 can't make back-up OP system cd
Message Edited by william isherwood on 06-05-200611:51 AM
Question
•
Storage, Drives & Media
VNXB 2 PT OP 10G ISCSI IO MOD PR-SFP
I have VNXB 2 PT OP 10G ISCSI IO MOD PR-SFP on the BOM
but not sure what SFP mean since i can only see 10G copper connectivity
on
the module , I need to connect 10G on fiber using iSCSI to the servers
, On the switch i have only 10G on fiber
Question
•
VNX
IP Blocklist for OA and OP Firewalls
is a zipfile that includes a good ReadMe.txt file with full
instructions as to how to import the blocklist into your firewall. The
blocklist is a joint effort by the good folks at the CoU, OP and OA
forums.
Highly recommended!
Question
•
Virus & Spyware
Latitude BG2200 Wireless Non Op on second OS
on one operating system, but not
the other. I can see the adapter in the hardware devices under the usable Op,
but not the second Op. Any ideas on how to enable it under the second Op? I've
tried the normal "find new hardware", but nothing seems to work.
Question
•
Networking, Internet, & Bluetooth
How to Move Win 10 op sys from HDD to SSD on INSPIRON 3650
Hi
I recently purchased this PC and installed an SSD onto it. I want to
migrate the OEM windows 10 op sys into the SSD.
Previously I would just load windows onto the SSD and then make that
the boot device....that option is not obvious when i go into the BIOS
Question
•
Storage, Drives & Media
I cannot use the dell resoration disk to reinstall my win 7 64 bit op system.
it keeps on stating: there are missing files?#
I cannot use the dell restoration disk to reinstall my win 7 64 bit op
system. it keeps on stating: there are missing files?
I have also tried to use the media tool to upgrade to windows 10 and it
states that there is a problem?
Question
•
Productivity Software
Dell Support Results
No Results found!