Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
Move network interface to a different device
Hello,
I have an NS960 with with 2 datamovers, active/passive. We have an iSCSI interface running through a single device - cge2-1. What we would like to do is move that interface over to a virtual 4 port trunk, which is already setup. I would like to do this via the command line, and not have to delete and re-set it up. Is it possible to do this? I understand that there may be some downtime in this process. Thank you.
Rainer_EMC
6 Operator
•
8645 Posts
109
0
Posted January 15th, 2012 14:00
No they probably won't
I would try if you can remove the old and add the new interface with the same IP - probably have to stop ISCSI before
Try in a lab or with a Simulator
Rainer_EMC
6 Operator
•
8645 Posts
109
0
Posted January 12th, 2012 15:00
Not possible – unless you get support to dialin and change the config files directly
Rainer