Solved!
Go to SolutionSAN OS upgrade
Our MDS 9513 is currently running with SAN OS 3.0 (2a). We are planning to upgrade it to recent versions. I could see NX-OS 4.1 as new,can we upgrade our MDS 9513 to 4.1 version from 3.0 (2a)? does NX-series supports MDS series directors? If not to what SAN OS version we can upgrade?
ConnectrixHelpe
259 Posts
549
1
Posted October 30th, 2008 10:00
Hello,
NX-OS 4.1(1b) must be upgraded to from 3.3(1c) only. I would recommend upgrading your switches to 3.31(1c) as soon as possible. Please keep in mind that any code below 3.1(2) is EMC end of life (EOL) and end of service life (EOSL). If you encounter any issues with EOSL code, you will most likely be requested to upgrade to continue being supported by EMC.
Thank you.ConnectrixHelpe
259 Posts
549
0
Posted December 4th, 2008 09:00
NX-OS 4.1(1b) was released by EMC on November 17th.
Thank you.ConnectrixHelpe
259 Posts
549
0
Posted December 4th, 2008 14:00
4.1(1b) was provided to the Partners group at the same time as it was posted for internal EMC Support. I know as I do the postings for internal support and cc them on the email. If the Partner site is not updated with 4.1(1b), please contact Partner Support in regards to this and they will be able to assist you. I will also send them an email reminder.
Thank you.ConnectrixHelpe
259 Posts
43
0
Posted December 5th, 2008 10:00
Hello,
I talked to the Partners Group and they posted 4.1(1b) today. You should see it now or very shortly.
Thank you.
ConnectrixHelpe
259 Posts
549
0
Posted October 30th, 2008 12:00
Thank you.