Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
A
Adminilator
7 Posts
0
1022
March 1st, 2019 03:00
Disk Setup mixed after cloning from reference device
Hi,
I'm trying to clone from an R540 reference device using OME 3.1. This works quite well except the disk setup.
We're usually using this setup
2x SSD in RAID1 (Volume1)
12x HDD in RAID60 (Volume2)
After cloning the disk are mixed. So
Volume 1 is 12x HDD in RAID60
and
Volume 2 2x SSD in RAID1
This isn't working with our Linux partitioning scheme. Do you know how to fix this?
Cheers,
Chris
jammac
1 Rookie
•
124 Posts
979
0
Posted March 2nd, 2019 09:00
You probably should go through support and you didn't nearly specify enough information for anyone to help.
Are these servers really identical? Are the disks located exactly in the same location on each of the servers? Are the controllers the same?
In the end I fear this will be resulting in what I recently told Dell, namely that OME3 is really nice, and would be even nicer if their QA wasn't lacking and actually heavily tested things like these.