Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
W
wpetering1
11 Posts
0
490
July 11th, 2022 13:00
Isilon X200 Recognized Disk Size Discrepency
I have a rejuvenated Isilon X200 3-Node cluster. Each node has 12 - 3TB drives (previously they were 500G drives). I have re-imaged the cluster with OneFS 7.2.1.x. Reported size for each node is 5.4TB when it should be 36TB. For some reason it is only seeing a 12 drive 500G filled tray, which is what the node used to have installed. Drives are Isilon approved 3TB drives. During the image load, I did see that the node reported a "device unexpected size" however I don't know how to tell each node there are 3TB drives installed. Thoughts to get cluster to see all 36-3TB drives??
Isilon_Dude
3 Posts
372
0
Posted July 14th, 2022 13:00
Any special reason to install an unsupported OneFS version? I recommend installing a new oneFS version, applying the most recent DSP and node firmware
wpetering1
11 Posts
356
0
Posted July 15th, 2022 11:00
No special reason. OneFS 7.2.1.x is the last image I have, which come to find out, it's generic and doesn't recognize the 3TB drives. In contact with support to get latest/last version available configured for the Original configuration. Since I can't recover root password, re-image is the last resort. Cheers
@wpetering1 , you can't just plug and play 500GB ->3T drives on Isilon. You need Dell to config it.
DELL-Josh Cr
Community Manager
•
9734 Posts
•
44224 Points
386
0
Posted July 12th, 2022 09:00
Hi,
Thanks for your question about drive sizes. The device is aware of the configuration it shipped with. https://dell.to/3AH105d Phone support may be able to change this to work with the larger drives.
Let us know if you have any additional questions.