UNSOLVED
Settings in bios to install windows 10
Hello I am looking to install Windows 10 with a bootable USB stick on my Dell Latitude E5430 Non-vpro, what settings in the bios should I do to perform the installation?
My current settings:
Bios: Legacy
Enable Legacy option ROMS: Enabled
Secure Boot: Disabled
@Edgix That should work, but if your system supports UEFI and Secure Boot, there’s no reason not to use that rather than sticking with Legacy. I would switch to UEFI and enable Secure Boot, which will disable Legacy Option ROMs.
nyc10036
6 Operator
•
5640 Posts
1884
0
Posted October 6th, 2020 10:00
That should work if you created the USB correctly.
.