There is no need to reconfigure the whole library. Right click on the storage nde in NMC -> Devices -> Storage Node and select "Scan For devices..". Once the scan is complete you will see a drive with an orange wrench under that storage node. Right click on that device and say configure drive. Simple hah!!!
rovinabi
55 Posts
264
0
Posted April 8th, 2010 00:00
Hi Consty,
There is no need to reconfigure the whole library. Right click on the storage nde in NMC -> Devices -> Storage Node and select "Scan For devices..". Once the scan is complete you will see a drive with an orange wrench under that storage node. Right click on that device and say configure drive. Simple hah!!!
hope this helped,
Rovin D'Souza.