Solved!
Go to SolutionW
wmtW1BHxGX12559
1 Rookie
•
100 Posts
0
4980
December 6th, 2012 00:00
NetWorker Windows 2012 support
Hi all,
Is Windows 2012 supported in NetWorker, and if not, when it will be?
In our enviroment we have several servers on Windows 2012 and would like to backup those.
thank you
1029
1
Posted December 6th, 2012 02:00
Hi Zlatko,
This is supported at the moment with NetWorker 8 as 'experimental support' on NetWorker clients only and in non-production. I expect that full support will be coming soon (I don't know exactly when).
Full details here:
NetWorker Support for Windows 8 and Windows Server 2012
-Bobby
1029
0
Posted December 6th, 2012 03:00
Thank you for your answer.
I have different question then...
Where can I report issues using NetWorker client 8.0.0.4 ?
In my case I have problem in defining Windows 2012 client on NMC using Client Configuration Wizard. When I put hostname, I got this error:
"RPC- Remote Procedure Call: Connection reset by peer"
I have no firewall on the host, and, NetWorker service is running.
1029
0
Posted December 6th, 2012 05:00
Non-wizard client creation and backup work like a charm.
Thank you for your help
1029
0
Posted August 4th, 2013 11:00
You linked
NetWorker Support for Windows 8 and Windows Server 2012http://solutions.emc.com/EMCSolutionView.asp?id=esg130592&usertype=C
I always get "The server at solutions.emc.com is taking too long to respond." when trying to access the resource.
Could you please verify the link? Thanks.
coganb
736 Posts
1029
0
Posted December 6th, 2012 04:00
You can use all the same channels for reporting an issue as you normally would.
Does non-wizard client creation and backup work?
If not, you should also check the connection between the two machines with the following command:
From the server: nsradmin -s -p 390113
From the client: nsradmin -s
From the client: nsradmin -s -p 390113
If this gets through to the nsradmin prompt, then the connection is ok, otherwise it is not. If you do not get the
nsradmin prompt, it means you have a connection problem and you will have to ensure that the name resolution is
correct between the two machines
-Bobby