Hi,

I have Juniper SRX-240H, configured in Active/standby mode. These boxes are connected to two Dell powerconnect 7024 switch device. The OSPF is configured here to auto divert the traffic on these switches .
On my Active box the ospf is working fine. But at the same time my standby box is unable to establish ospf neighbourship.
Does it possible to have same ospf on both standby and Active boxes?

The connectivity between firewall and switch is

Firewall 1 connect to switch 1. Firewall 2 connect to switch 2. Also there is connection between 2 switches which are declared as trunk port.

Please help me

Regards

Bakul