Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
A
alexia_net
1 Rookie
•
25 Posts
0
9896
August 31st, 2007 06:00
Connect switch PC 3448 with 5324
Hi. I am a little confused. I have connected three switches Dell: one 3448 and two 5324 using a cable - simple cable and crossover too. The thing is: the connection between the 5324 switches is ok - only green ligths - but the connections between a 5324 and 3448 switch is not ok because at one end the red light is on. Any idea why? I have tried to add an extra cable but no luck. Thank you!
- you're getting an amber light for the connection between the 5324 and 3448 because the 3448 is 100mb and the 5324 is 1000mb. you should lock down the ports connecting these two switches at 100mb full duplex. the amber light on the 5324 is ok as long as it is the link(left light)and not the duplex.
alexia_net
1 Rookie
•
25 Posts
366
0
Posted September 18th, 2007 08:00
Thank you all. I have bought optic fiber. :)
nlspears
52 Posts
366
0
Posted September 7th, 2007 12:00
Message Edited by nlspears on 09-07-2007 08:43 AM