Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
B
bsingleton
3 Posts
0
25029
March 23rd, 2015 11:00
Dell 5548 Force 10 configuration CLI
I have inherited a Dell 5548 that I am not able to access the web interface on. Through CLI, I have discovered two VLANs are configured. 4094 is set as the default but down with line protocol down as well. No IP is set on it. VLAN 1 is up and an IP configured. My attempts to set this as default through CLI have failed. I am needing to access the web GUI to reconfigure as I am not familiar with CLI. Can someone guide me with the CLI commands to get VLAN 1 set to default or set 4094 to up so I can assign an IP and gain access? TIA.
bsingleton
3 Posts
1334
0
Posted March 24th, 2015 15:00
Daniel, thank you. I follow and can get to the switchport commands but it does not take them. Private-vlan is all that is available for commands.
Console(conf)#interface gigabitethernet 0/1
Console(conf-if-gi-0/1)#switchport mode access
^
% Error: Invalid input at "^" marker
bsingleton
3 Posts
1334
0
Posted March 24th, 2015 12:00
Daniel, thank you. I follow and can get to the switchport commands but it does not take them. Private-vlan is all that is available for commands.
Console(conf)#interface gigabitthernet 0/1
Console(conf-if-gi-0/1)#switchport mode access
^
% Error: Invalid input at "^" marker