Solved!
Go to SolutionForce10 S60 - Enabling Web GUI
Does anyone know how to access/enable the web GUI on a Force10 S60? I have the switch configured to the point that I can ping it from a client, but I cannot seem to get access from a web browser. The help files haven't given me much insight into the issue, so I'm hoping somebody here can point me in the right direction.
Thanks in advance,
-Michael
Thanks for the info, Josh, I guess that means I can quit tormenting google with baseless search queries...looks like it's time to get comfy with the CLI syntax.
One other question, though: is there something special about VLAN1 on the S60's? Compared to the other VLANs it seems to have different configuration requirements, almost like it's reserved in some way.
-Michael
DELL-Josh Cr
Community Manager
•
9694 Posts
•
43679 Points
8088
0
Posted February 23rd, 2015 08:00
VLAN 1 by default is the management VLAN, so it is designed to just have management traffic on it.
DELL-Josh Cr
Community Manager
•
9694 Posts
•
43679 Points
8088
0
Posted February 20th, 2015 17:00
Hi Michael,
There is not a web management interface on the S60, it is only CLI. The commands that worked for the S50 are not in the configuration guide for the S60. http://downloads.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd_prt_swtchs/force10-s60_Reference%20Guide5_en-us.pdf
http://downloads.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd_prt_swtchs/force10-s60_Reference%20Guide6_en-us.pdf