UNSOLVED
F
FirestormF
7 Posts
0
2663
March 12th, 2018 13:00
IO Module offline
We use a Dell M1000e for non prod workloads. I configured it over 3 years ago and haven't touched it much. The past week one of my M8024-k modules is reporting offline. I have three others in the chassis still up.
The only message I can find is the module is offline and the power is off. I can't connect to the IO interface directly. I've tried powering it on via CMC but it turns off again. I've also had remote services physically reseat the module but same result.
Can someone point me in the right direction here? Other than the module not staying powered on, I can't find anything telling me what the real problem is.
FirestormF
7 Posts
2149
0
Posted May 10th, 2018 13:00
The switch was replaced. Problem solved.
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
681
0
Posted January 26th, 2022 07:00
pphales,
This is the English board, I would suggest that you post in the Spanish, found here.
Este es el tablero del en inglés, te sugeriría que postees en el en español, que se encuentra aquí.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Josh Cr
Community Manager
•
9777 Posts
•
45028 Points
2336
0
Posted March 12th, 2018 15:00
Hi,
Can you private message me the service tag of the system so I can get some additional information? Both the Chassis and the switch.
If you can have the downtime to swap the switch with the other one in the same fabric we may be able to isolate the issue between the slot and the switch.