UNSOLVED
Role based CLI access
Looking for some help configuring some role based access for lower level users on our Powerconnect 3548Ps. At the moment I'm not seeing anything in the CLI reference guide that is indicating this is possible.
Figured I'd check here to see if there are any gurus that may be able to shed some light before having to dismiss the idea.
Currently all authentication is local, i.e. - no RADIUS or TACACS. Running 2.0.0.52 SW
Thank you
abpanda
1 Rookie
•
16 Posts
452
0
Posted January 28th, 2014 12:00
What's interesting about the privilege level is that the same command set is available all the way up to level 14. Once 15 is given you get everything. From level 1 - 14 you only receive the following.
clear, disable, enable, exit, help, login, ping, resume, show, telnet, terminal and traceroute
I want to be able to provide the ability for the help desk to clear port security if necessary. So you see my dilemma.
Unfortunately, while the management ACLs do provide a degree of granularity for access control, they do not do anything for CLI command restrictions. Thank you for the recommendation though.