UNSOLVED

pradeepgowda

updated

7 years ago

0

3792

April 30th, 2019 10:00

7060, network driver issue

Hello, I am not sure if this question has been asked previously or not!!

Problem: I am able to deploy OS via MDT/WDS UEFI but OS got installed without the Network driver. this problem is only with this model, I do not have any problem with any other models I have imported the latest Dell Command | Deploy Driver Pack CAB, also imported the Intel-I2xx-825xx-Gigabit-Ethernet-Network-Controller_KNYK0_WIN_23.0.12.0_A06.EXE (Windows 10 x64).

Deployment share up-to-date.

BDD log shows it is reaching the right folder for drivers. M

DT 8456 ADK 1809 (latest)

Thanks for your help in advance,

  • 3550

    0

    Posted April 30th, 2019 11:00

    Thanks for the response, I shall try and update here, 

    the one you're referring to the newer than this 7060-win10-A05-WJ1NN.CAB? 

  • 3562

    0

    Posted April 30th, 2019 11:00

    Hello, I am not this questions has been previously or not!! Problem: I am able to deploy OS via MDT/WDS UEFI but OS got installed without the Network driver. this problem is only with this model, I do not have any problem with any other models I have imported the latest Dell Command | Deploy Driver Pack CAB, also imported the Intel-I2xx-825xx-Gigabit-Ethernet-Network-Controller_KNYK0_WIN_23.0.12.0_A06.EXE (Windows 10 x64). Deployment share up-to-date. BDD log shows it is reaching the right folder for drivers. MDT 8456 ADK 1809 (latest) Thanks for your help in advance,

  • speedstep

    11 Legend

    46969 Posts

    3556

    0

    Posted April 30th, 2019 11:00

    The current cab file

    https://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverid=2y4jf

    https://downloads.dell.com/FOLDER04891884M/1/7060-win10-A00-2Y4JF.CAB

    You cannot point to a cab file.

    You use WINZIP and extract the contents.

    The Nic driver is

    https://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverid=knyk0

     

    However Chipset drivers must be deployed for devices to properly enumerate.

    audio
    VHRXR_A00-00
    Realtek High Definition Audio Driver
    chipset
    691VF_A00-00
    Intel Chipset Device Software Driver
    chipset
    6G1JT_A00-00
    Realtek PCIE Memory Card Reader Driver
    chipset
    H76XV_A00-00
    Cypress USB connector manager class extension UcmCx Client Driver
    chipset
    JDWW7_A00-00
    Intel Serial IO Driver
    chipset
    RGMP1_A00-00
    Intel Management Engine Components Installer
    communication
    1GPT9_A00-00
    Sunix Serial/Parallel Card Driver
    communication
    GXFYW_A00-00
    Sunix USB31 Card Cypress Driver
    network
    3KFDM_A00-00
    Qualcomm QCA61x4A QCA6174A-XR QCA9377 WiFi Bluetooth Driver
    network
    FG58X_A00-00
    Aquantia 5G Network Addin Card Windows x64 Driver
    network
    KNYK0_A00-00
    Intel I2xx/825xx Gigabit Ethernet Network Controller Driver
    network
    TR1H1_A00-00
    Intel 9260 9560 8265 7265 3165 WiFi Driver
    network
    VCVTC_A00-00
    Intel 9x60 826x 726x 3165 Bluetooth Driver
    security
    F4YTN_A00-00
    Dell ControlVault2 Driver and Firmware
    storage
    KFRJ3_A00-00
    Intel Rapid Storage Technology Driver and Management Console
    video
    3NN15_A00-00
    Intel UHD Graphics 610/630 Series Driver
    video
    734DK_A00-00
    AMD R5-430 and RX550 Graphics Driver
    video
    C8Y5W_A00-00
    nVIDIA GeForce GT730 and GTX1050 Graphics Driver

     

     

  • rga6

    1 Rookie

    16 Posts

    3522

    0

    Posted April 30th, 2019 14:00

    Make sure you inject the WinPE10 driver CAB into your boot.wim IN BOTH INDEXES. For whatever reason with the 7060, I had issues until I injected into both indexes of boot.wim. Worked fine after that!

  • speedstep

    11 Legend

    46969 Posts

    3534

    0

    Posted April 30th, 2019 14:00

    Yes.

    Use 7zip to extract the contents of the cab file.

    Saving into the documents folder is advised.

     

  • 3405

    0

    Posted May 10th, 2019 00:00

    Hello Rga6,

    I am able to boot to PXE and OS is being deployed but the end of OS applied Network driver is not getting installed so the deployment is NOT continuing to install the application. 

    I am using the single TS for multiple Models. TS driver injection method is Set DriverGroup. 

  • 3406

    0

    Posted May 10th, 2019 00:00

    Hey Guys,

    Unfortunately, This didn't work, As a workaround, I am injecting drivers twice in TS, once in Preinstall stage and Postinstall stage, as set DriverGroup.