Improper configuration and routing.

If you remove all but 1 nic and can then get to the internet.


Nics dont automatically route between each other.

Its bad enough when 2 nics are in there.

Removing doesnt mean physically. It just means disable in software via the bios or a driver.

Message Edited by SpeedStep on 06-12-2005 02:30 PM

I disabled three NICs using Network Connections still having the same problem. What next?

would suggest to stop "Routing and Remote Access service" to prevent making your server as a router. issue "route print" under the command prompt to make sure the default route is pointing to the ethernet interface of your Internet router.

I solved the problem by using the ISP's primary DNS instead of using the local gateway as the DNS (which incidentally works for the PC's on the network).