This was sort of asked in a different post, but the answer didn't seem to quite apply; sorry for "re-asking".
I have a 5820, and am using all four bays with HDDs. I also have the slimline ODD, which is DREADFUL for ripping audio CDs, so I'm looking to populate the 5.25" bay with an optical drive. I have a SATA *data* connector hanging free at the back of that empty bay, but I don't see a corresponding *power* connector.
Is there a SATA power cable buried under there that I just didn't see? Is there a header I can pull power from?
I haven't removed many parts from that section of the machine, but I ASSUME I can get to the slimline drive.
Can I just use some sort of Y-cable for power (perhaps from the slimline drive), and use the data cable that's already in the case? Or is this one of those "if you've installed this, you can't install that" kinds of things (a la four hard drives and Dell's NVMe kit)?
Thank you, mazzinia, there WAS a power cable in the area -- it was looped back around, and the connector was curled up inside the end of the power supply, so I couldn't tell that it was free.
Sorry to revive a 2 year old thread but I am in the same position with that power cable and the video that was linked to https://qrl.dell.com/Product/Detail/162 is no longer present.
Open the case panel and looking at the bottom surface of the power supply. A SATA power cable is tucked along the power supply together with a 10-pin power cable for motherboard.
mazzinia_
6 Operator
•
1512 Posts
•
6322 Points
1329
1
Posted December 9th, 2021 09:00
update
https://qrl.dell.com/Product/Detail/162 , check at 1:34 and onward, shows that a power cable is located in that position. Please confirm if present