UNSOLVED
Closed
E
Eddie_Securecom
1 Message
0
287
August 3rd, 2023 11:00
LSI Raid Controller into A 5820
Hello All I’m new to this forum. I recently installed an LSI LOGIC megaraid raid controller LSI00330 into a 5820 precision. Unfortunately in bois it doesn’t seem to recognize it. Ive read a few threads that stated that the drivers for the LSI should automatically install allowing on you to reach the LSI device on the the following boot. This is not the case. Cannany help me. Thank you so
46
0
Posted August 4th, 2023 05:00
Latest driver, if not installed by windows
https://docs.broadcom.com/docs/MR_WINDOWS_DRIVER_6.14-6.714.05.00-WHQL.zip
Latest GUI storage manager software, to configure drives, and monitor them, from windows
https://docs.broadcom.com/docs/17.05.06.00_MSM_Windows.zip
All resources
Chino de Oro
11 Legend
•
8458 Posts
•
46451 Points
54
0
Posted August 4th, 2023 00:00
Dell only provides support drivers and firmware for LSI MegaRAID SAS 9440-8i and 9460-16i.
To test any unsupported controller, you may need to turn off UEFI and enable legacy mode. Also, verify if the controller is supported by your operating system, for proper driver installation.