UNSOLVED
Precision 5820 troubleshooting
Hi,
My 5820 wont start. The power button will briefly flash yellow for a few seconds, then the power supply will shut the power and restart, the green LED on the power supply will come on and off so the front power button will come on and off. I do not think it is the way the power supply behaves. Anyone has any idea on troubleshooting?
thanks.
7476
0
Posted December 14th, 2020 13:00
Power button LED blink codes are explained in the manual:
7450
0
Posted December 18th, 2020 17:00
the computer is 6 month old. It powers on and off in less than 10s, no POST, monitor never come on, I think it is power supply issue. I need a confirmation that the power supply will remain on when it is pulled from the computer. Now the power supply behaves the same inside or outside the computer.
7451
0
Posted December 18th, 2020 17:00
The computer will power on and off in 10 sec, before it gave the LED code. The computer is 6 months old. The battery is good.
7446
0
Posted December 18th, 2020 19:00
Your computer is still under warranty! Why don't you ask Dell Support?
7430
0
Posted December 19th, 2020 05:00
Like me.myself.i wrote, you should contact prosupport since you're under warranty.
This said, the psu has a translucent handle. The handle turns green if the precision is turned on (and the psu is good ), and turns amber if the psu is faulty
When updating the firmware of the power supply unit, the power supply unit handle flashes green. <<<< Maybe is this... do you remember being notified about Dell updates being available ( and you accepted installing them ) , before this issue started ?
mazzinia_
6 Operator
•
1512 Posts
•
6322 Points
7484
0
Posted December 14th, 2020 05:00
No beeps or pattern in the flashing lights ?
A quick thing to check could be simply to change the cmos battery... if one dies, a lot of times tends to cause weird results