I own an old T1700 Workstation (XEON E3-1245) and I want to increase the RAM from 16GB to 32GB. My actual RAM is : 4x4GB PC3L-12800U (2 Hynix + 2 Kingston). I have read in the spec that I had to use 32GB ECC so I bought 4x8GB PC3L-12800R and it doesn't work because the memory have to be UNREGISTERED and mine is REGISTERED... Now I need to find a real and sure solution, I am totaly... lost.
TO REACH 32GB DO I NEED : QUESTION 1) PC3 or PC3L ? 1.5V or 1.35V ? QUESTION 2) 12800, 12800E, 12800U ? QUESTION 3) ANYBODY HAVE OR HAD 32GB ON A XEON T1700 ?
@OLIWOOD , yes, for a 32 GB configuration, you will need 4 x 8 GB of PC3L-12800 UDIMM. Crucial is a good place to purchase. They provide guarantee to work, and accepting return.
Review your needs, 16 GB is sufficient for every day usages. Only upgrade to resolve memory issue or because you can source them at dirt cheap price.
Then, upgrading memory will be a must. Just note that your Crucial link was not a compatible memory for your system. Mainly, look for PC3L-12800 UDIMM. Your system can take both ECC and non-ECC. However, with ECC memory, you can upgrade to maximum of 32 GB. For non-ECC, you can only upgrade to a maximum of 16 GB. Mixing capacity is not support but it could work.
Chino de Oro
11 Legend
•
8458 Posts
•
46451 Points
0
0
Posted February 5th, 2024 09:46
You will need DDR3L-12800, 1.35V, UDIMM, not RDIMM.