Team,

      We recently had a predictive failure on one of our raid 5 drives, the global hotspare kicked off and rebuilt the drive successfully.  However, after the rebuild was completed.  We swapped out the bad drive with a new one; the server won't spin up the new drive to assign it as a global hotspare (we've tried drives that we know work), it's like it doesn't have power.  We replaced the backplane to see if that was causing the issue;  no Luck, any ideas?  I'm sure this has been seen in the past.  It's Disk 6 in Backplane 1 that's giving us issues.  Thank you everyone who has any information on this issue.

EDIT: I Forgot to mention that within the bios on the perc raid controller it doesn't list Disk 6 in Backplane 1