Solved!
Go to Solution1719
0
Posted January 9th, 2008 12:00
Initial machine load ...mini reboot if you will1719
0
Posted January 9th, 2008 13:00
When a full or FE IML is done, more than likely manually, this is done in accordance to your approval and impact. What I mean by that, if EMC needs to IML Director(s), they would work with you to schedule that and more than likely be in the phone with you as this is going on. Or on the phone with the on site EMC representative that is contact with the Support Centre.
Hope that helps,
Michael1719
0
Posted January 9th, 2008 13:00
Like switch ON and OFF? so each director be IML independantly.. right?1719
0
Posted October 4th, 2009 04:00
BTW, what do FD/FE stand for?1719
1
Posted October 5th, 2009 11:00
BTW, what do FD/FE stand for?
There are two different type of IML's that a Symmetrix director can go thru. The first type is FD which is also know as a fast IML and an FE which is know as a full IML.1719
0
Posted October 6th, 2009 07:00
MikeMac .. never issued a $FD ..
MrTS2Symm
113 Posts
1719
0
Posted January 9th, 2008 13:00
There are 2 different types of IML's, one called a quick IML or a FD of the director. This is done when there are changes in the devices on directors or moves made that you want all directors to know about. Say a Control Center add or SDDR move. The other is a full IML, which was more than likely yours, and that is called a FE of the Director.
These are the terminologies that are used when EMC talks about IMLing a Director or why it needs to be done.
Michael