Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
BL
Bill Lally
23 Posts
0
5836
October 31st, 2006 20:00
DRAC 4 Web-based interface is no longer accessible
An Admin tried to update the firmware for a DRAC 4 card installed in a PowerEdge 2850.
But when I or others attempt to access the DRAC via a Web browser, all we get is the following message:
A firmware update is currently in progress. The DRAC 4 Web-based interface is no longer accessible. You can log in again after the firmware update has completed.
Firmware update has been running for well over 72 hours, so something is wrong.
How can I clear this message and/or rollback the botched Firmware update?
Bill Lally
23 Posts
544
0
Posted November 8th, 2006 16:00
So even Dell techs won't help with this?DELL-JamesC
206 Posts
544
0
Posted December 1st, 2006 14:00
If the DRAC 4 does not show at POST time you will need to drain the caps (FLEA Power) by holding in the power button, with the system off, for 30 seconds.Then update the DRAC 4 to version 1.41 to correct the issues that cause it to hang.
Bill Lally
23 Posts
544
0
Posted November 3rd, 2006 04:00