Solved!
Go to SolutionUnity 300 SMB share and IBMi Series
Hi folks,
Am wondering if anyone out there has experience with Unity and IBM iSeries? I have a customer who is running an iSeries on V7R3 (internal disk) and are trying to connect to a Unity file share via QNTC. The file share is mapped but none of the directory structure is displayed. Per IBM's instructions, the user connecting to the share is the same and has the same password. Wireshark traces to the share from the iSeries show the Unity sending a [FIN, ACK] after credentials are sent. Customer has this working with Synology and other Windows servers with no problems. Any ideas?
Rainer_EMC
6 Operator
•
8645 Posts
1905
0
Posted July 3rd, 2019 07:00
I would suggest to take a network trace and open a service reqeust
I'd love to know if you identified the cause of this issue and more importantly if there was a solution. I have a multifunction device (Photocopier) that is scanning to a Unity 300 SMB share and if SMB2/3 is enabled the server send a FIN,ACK immediately after receiving the session setup request. Works fine if only using SMB1. As well this copier works with other windows file servers no problem with SMB2/3 enabled.
Thanks.
Rainer_EMC
6 Operator
•
8645 Posts
1662
0
Posted February 27th, 2020 05:00
upgrade to the latest Unity OE - there were some fixes in the smb2/3 area lately
also upgrade your photocopier firmware
if the problem still persists take a network trace and get it analyzed through a service request
without seeing what happens on the network its just guessing
Rachel in IT
2 Posts
935
0
Posted February 16th, 2022 10:00
Did you find anything with this? I am having the same problem with a recently updated iSeries V7R3. I can connect the iSeries to Windows server shares but not the Unity. On a trace, the error is: STATUS_INVALID_PARAMETER 0XC000000D.
DELL-Sam L
Community Manager
•
8128 Posts
•
34649 Points
929
1
Posted February 16th, 2022 17:00
Hello Rachel in IT,
What is your Current OE version?
Rachel in IT
2 Posts
866
0
Posted February 24th, 2022 12:00
Hi Sam,
After putting in a ticket with Dell, it was related to KB 000033501 - Dell EMC UNITY, VNX: AS400 SMB Client Access Denied to Unity/VNX CIFS Share (Dell EMC Correctable)
Our previous AS400/iSeries (that is working) is on OS v7r1 and must be running local authentication on the NAS. This new build AS400 that was having the problem is OS v7r3 and defaults to SMB2. One of Dell's engineers updated the parameters on our NAS and the shares started working to our AS400 again.