Solved!
Go to SolutionA
Anadolubank
47 Posts
0
2783
February 25th, 2010 12:00
vmware native multipath with celerra Ns40
Hello ,
we have several vsphere hosts and a celerra Ns40. We are currently using link aggregation with iscsi. we want to use vmware native multipath. I think we need to configure an iscsi target with multiple ip address , each esx host has 4 uplink port for the iscsi network. we have 12 iscsi target at the cellera . Do we need to configure each iscsi target with 4 ip address ? is there any detail document about vmware native multipating with celerra ?
Thank you.
The best summary I have seen on iSCSI multipathing with vSphere is on Chad's blog, here:
It goes through exactly how to leverage multiple paths on Celerra (and others).
Thanks,
Scott
Anadolubank
47 Posts
651
0
Posted February 25th, 2010 23:00
Hi scott,
Thanks for the responce .
I've already read it. I need more detail. I'm not sure how many ip adress must be configured in an iscsi target. I've 12 iscsi target in celerra and 4 uplink port in vsphere host for the iscsi network. Do i need to configure 4 ip adress in an iscsi target?
Thank you
Anadolubank
47 Posts
651
0
Posted March 5th, 2010 00:00
Hello ,
Does anyone have any advice ?
Thanks.
duncj
11 Posts
651
0
Posted February 25th, 2010 13:00
Cheers,
Duncan
Sent from my Palm® Treo™ smartphone.