Solved!
Go to SolutionJ
JimboadmGFC
6 Posts
0
2920
June 14th, 2011 05:00
Initial replication between 2 VNXe boxes.
I'm trying to do an initial replication between my 2 VNXe boxes. The problem is once its complete I need to relocate one of the boxes to a new location. I have a different subnet at the other location. Is it possible to change the ip address on the box and maintain the replication? If not what do you suggest I do for the initial replication?
JimboadmGFC
6 Posts
743
0
Posted June 16th, 2011 14:00
I will actually be replicating all 3 of the protocols.
Shivanand1
70 Posts
744
1
Posted January 26th, 2012 04:00
The direct link for the article emc268724 is,
http://csexplorer.isus.emc.com/eservice/iviewcs/ui/eserver.asp
Please let me know if you can open the link or provide me your email ID.
Regards
Shivanand
I cannot open the link can you maybe mail it to me? cobus.smit@gijima.com
Rainer_EMC
6 Operator
•
8645 Posts
744
1
Posted January 26th, 2012 06:00
Open Powerlink.emc.com
Go to Support – > Search Support
Enter into the search box emc268724
If that doesn’t work for you than you might not have the correct entitlements.
I suggest you contacts your EMC or sales part to sort that out.
jason.sparks_69
8 Posts
744
0
Posted February 1st, 2012 07:00
Hello Cobus,
Did you update the connections status on both sides. It is really importatnt to make sure that your networking is correct at the new side. If it is not and your default gateway to the datamover is nor correct you will see this behavior.
Jason
Hi Jason,
I created a new replication to test it and it is working, I am still unable to resume the other two replications as they are greyed out. I am aslo unable to delete any of those replication sessions or LUN's associated with them. Is there any cmd line I can use to delete a replicated session or LUN or to resync it again? I have done a few webex sessions with VNXesupport but with no luck yet.
Thank you,
Cobus
jason.sparks_69
8 Posts
743
0
Posted June 17th, 2011 18:00
You first setup replication connections from your source to target. Complete your initial replication. Once you have replicated what you need, you can pause replication. Shutdown and halt the VNXe that is your target. Move it to where you want it to be. Follow emc268724 to re-IP your target platform. Once you have moved and re-IP'd your target, go into hosts, replication connections and modify and update your current connections. Once this is complete, replication will continue from the last known good checkpoint.
Good Luck.
Jason