Solved!
Go to Solution4670
1
Posted April 21st, 2021 04:00
Remove all the AWCC Software
Reboot at least 3 times to repair the registry.
Then install this
https://dl.dell.com/FOLDER05890641M/1/ACCSmartInstaller_54PV1_1.1.19.1_WN32_A00.exe
Then reboot.
Then install this
https://dl.dell.com/FOLDER05542089M/1/Alienware-OC-Controls_FPN9K_WIN64_1.2.34.1214_A00.EXE
Then reboot
Then install this
Then reboot.
Then re test.
3653
0
Posted April 21st, 2021 03:00
Thanks for your help but i need help for the alienware command center because that doesnt work.
And i dont know why but i can overclock the ram to 2933 Mhz .
3686
0
Posted April 21st, 2021 03:00
Thanks but i already knew. The problem is not that i cant overclock because i can in bios.
The issue is that i cant overclock in Alienware command Center.
3672
0
Posted April 21st, 2021 03:00
3680
1
Posted April 21st, 2021 03:00
Bios is only 1 piece.
What exact cpu do you have I5 or I7?
What exact Ram do you have?
Overclock is not on demand by the user.
All of the Items are REQUIRED.
What does the Mainboard TAB and ram TAB and RAM spd TAB for each stick say in CPU-Z ?
Mixing speed and rank and vendor is not supported.
3697
1
Posted April 21st, 2021 03:00
XMP is enabled and disabled in bios.
Turbo Boost speed is controlled by the cpu based on how many cores are running and what load and temperature.
User doesn't get to choose speed its determined by the XMP profile in certified ram.
Installing DDR 4 4266 ram doesn't make it run that fast.
2666 or 2933 may be max depending on Intel or AMD cpu. Some AMD do 3200.
JEDEC VS XMP
3660
0
Posted April 21st, 2021 03:00
Ram
Four slots
Maximum 128GBSpeed Limit based on XMP certified and CPU.
2666 MHz, i3/i5 CPU with 3200MHz /4266MHz
2933 MHz, i7/i9 CPU with 3200MHz /4266MHzValidated Ram
C5N22 16GB DDR4, 3200MHz, 2Gx64, 2RX8, Unbuffered, 288 pin, Dual Rank, 1.2V, Non-ECC, Non-Encrypted, Adata AO2P32NCST2-BZ7SHD, Hynix HMA82GU6DJR8N-XN, Kingston KC5N22-HYD/KC5N22-MIE, Micron MTA16ATF2G64AZ-3G2J1, Samsung M378A2K43EB1-CWE
**************************************************
HX424C15FB2K2/16
16GB (8GB 1G x 64-Bit x 2 pcs.)
DDR4-2400 CL15 288-Pin DIMM
https://www.kingston.com/dataSheets/HX424C15FB2K2_16.pdf
That ram has no actual XMP setting for 2666 or 2933
TIMING PARAMETERS
JEDEC/PnP:DDR4-2400 CL15-15-15 @1.2V
DDR4-2133 CL14-14-14 @1.2V
XMP Profile
DDR4-2400 CL15-15-15 @1.2V**********************************************************************
3675
0
Posted April 21st, 2021 03:00
I have a Intel i5 10600kf and Hyperx HX424C15FB2K2 2400 mhz 2x8 gb Ram.
3651
0
Posted April 21st, 2021 03:00
speedstep
11 Legend
•
46969 Posts
3644
0
Posted April 21st, 2021 04:00
Uninstall all AWCC from Microsoft store, make sure the service is gone
Reinstall AWCC + Components
https://dl.dell.com/FOLDER06947463M/2/Alienware-Command-Center-Application_J4MMM_WIN_5.2.106.0_A00_01.EXE
(Check for updates repeatedly)
Retest
https://dl.dell.com/FOLDER06895804M/1/Alienware_Aurora_R11_1.0.4.exe
So you have
AURORA R11 MOTHERBOARD LGA1200 N43JM
BIOS 1.04
Intel i5 10600k
You are not allowed to adjust the clock in bios.
The ram you have runs at 2400 on the XMP profile.
If you are expecting to control the cpu and run with all cores 4.8ghz you are barking up the wrong tree because turbo boost is marketing not guaranteed performance.
https://ark.intel.com/content/www/us/en/ark/products/199311/intel-core-i5-10600k-processor-12m-cache-up-to-4-80-ghz.html
The AWCC and the bios are integrated in such a way that the bios update may require a new version of the software.
Either way you are not allowed to adjust the voltage or frequency this is controlled by the SPD in the ram and XMP enabled in bios.