UNSOLVED

Dicekt

updated

8 years ago

D

Dicekt

3 Posts

0

16135

August 13th, 2018 05:00

15 R4, M.2 slots question

Good morning!

I understand the laptop has 3 SSD slots, and the two M.2 2280's have different compatibilities. One is SATA/PCIe NVMe compatible, the other is just PCIe NVMe.

I ordered mine with just one SSD installed, no other hard drives. My question is... Was the pre-installed hard drive installed at the PCIe/SATA slot or the PCIe slot? Which slot is which? 

Thank you,

Andrew

  • Eimy_B

    6 Operator

    •

    4365 Posts

    14569

    0

    Posted August 13th, 2018 09:00

    Hi @Dicekt,


    15r4 storage.PNG

    Here is the storage information for your system.

    What pre-installed SSD do you have?

  • Eimy_B

    6 Operator

    •

    4365 Posts

    14560

    0

    Posted August 13th, 2018 10:00

    It should be installed on the PCIe slot. One of the 2280 ones.

    You can open it up and check, or check the service manual online.

  • Dicekt

    3 Posts

    14563

    0

    Posted August 13th, 2018 10:00

    Hi @Alienware-Eimy,

    Thank you for your quick reply!

    The preinstalled SSD is a 512GB PCIe M.2 Class 50 SSD (make/model not specified).

    Is there a standard as to where this should have been installed (which slot)? Or do I need to open up to check?

    Thank you,

    Andrew

  • Dicekt

    3 Posts

    14576

    0

    Posted August 13th, 2018 11:00

    @Alienware-Eimy

    Well I understand it has to be installed in one of the 2280 slots, just wondering which one since only one is SATA compatible.

    The Setup and Specifications PDF does not say which slot (1, 2, or 3) is the PCIe only slot. I am wondering which slot is PCIe and SATA compatible, to know where to install a SATA SSD.

    Thank you!

    -Andrew

  • Eimy_B

    6 Operator

    •

    4365 Posts

    14745

    0

    Posted August 14th, 2018 14:00

    @Dicekt,

    SSD1 is PCIe/SATA.
    SSD2 is SATA.
    Half Size is PCIe/SATA

  • Toasty69

    1 Message

    13879

    0

    Posted November 13th, 2018 20:00

    The chart above states all three can handle Pcle? I have just purchased the same laptop.

  • Silencer_SG

    1 Message

    13105

    0

    Posted December 27th, 2018 23:00

    Same laptop.

    I've bought and installed an M.2 SATA WD Blue SSD - Device Manager, Disk Manager, BIOS, all can't detect the drive!

    What's going on Dell!

  • 5968

    0

    Posted May 12th, 2019 12:00

    So if i buy a 2TB M.2 SSD, will it work or only with 1TB? because i will buy a alienware 15 in about a week and really hope for a quick respond. Thanks

  • jphughan

    11 Legend

    •

    13985 Posts

    •

    79931 Points

    5963

    0

    Posted May 12th, 2019 13:00


    @HimboIsLife wrote:

    So if i buy a 2TB M.2 SSD, will it work or only with 1TB?

     

    because i will buy a alienware 15 in about a week and really hope for a quick respond. Thanks


    @HimboIsLife   I can’t speak to the SATA/NVMe issue, but don’t worry about capacity. When Dell quotes a maximum capacity, it’s the highest capacity available from the factory and/or the highest capacity they tested. The last time there was an actual hardware-related limitation on drive size was around 137GB because motherboards and OSes has to support "48-bit LBA addressing" to use larger drives, but that obviously happened a long time ago, specifically back in the Windows XP says where SP1 was required for that support.

  • jphughan

    11 Legend

    •

    13985 Posts

    •

    79931 Points

    8258

    0

    Posted May 12th, 2019 13:00


    @Silencer_SG wrote:

    Same laptop.

    I've bought and installed an M.2 SATA WD Blue SSD - Device Manager, Disk Manager, BIOS, all can't detect the drive!

    What's going on Dell!


    @Silencer_SG   if you haven’t already, try just reseating the SSD, and of course the other M.2 slot. Also, where are you looking in the BIOS? If it’s the boot order, don’t look there for a new disk on a UEFI system. Check the System Information/Summary area that lists the detected hardware. But if you don’t see it there, there’s no point checking Windows because if the system doesn’t see it at a hardware/firmware level, then there’s no way the OS will.