Help

Start a discussion
UNSOLVED

jackychencoffe1

updated

14 years ago

J

jackychencoffe1

3 Posts

0

1774

August 20th, 2012 08:00

Avamar replication issue

Hello, have anyone who can help me resolve this issue?

I am using 3x0.5TB AVE replicate to 1x2TB AVE. One 0.5TB AVE replication has some issue(other two AVE are all worked well). While I tried to use Enterprise Manager to save the settings for replication, it will display "Error saving replication configuration. Read timed out". I also tried to use Avamar Administrator console to setup replication(service administration to configure), it will hang and no respoding..

I tried to telnet 9443 port, it succeesfully. Also tried to reinstall AVE, still has same issue.

Thanks who can give me some help on this issue.

  • J

    jackychencoffe1

    3 Posts

    566

    0

    Posted August 20th, 2012 08:00

    Append one information.

    All the AVEs are 6.0.2-153 and host in ESXi 5.0

  • S

    Sandeep_Sinha

    307 Posts

    566

    0

    Posted August 21st, 2012 01:00

    Hello,

    It seems that replication destination is not selected. was this working earlier or is this a new configuration ?

    If this was working in past, please check /usr/local/avamar/var/cron/replicate.log for errors on the source AVE

  • J

    jackychencoffe1

    3 Posts

    566

    0

    Posted August 21st, 2012 01:00

    Hello,

    This is the first time to replicate. The configuration as below

    After I click “Save”, then after a few minutes, it will display “Error saving replication configuration. Read timed out.

    Jacky Chen Regional Operational and Communications Services Administrator (Asia)

    Building 25, Dongjing International District, Jintian Road, Suzhou, Jiangsu 215123 CHINA

    (phone) +86 512 6260 2640 | (fax) +86 512 6260 2669 | (mobile) +86 13915562559 | (VoIP) N/A

    jacky.chen@aptar.com | NYSE: ATR

    ` Please consider the environment before printing this e-mail

    3 Attachments

  • S

    Sandeep_Sinha

    307 Posts

    566

    0

    Posted August 21st, 2012 02:00

    The replication destination is not being monitored by the Enterprise manager.

    To configure replication using Enterprise manager, please add the replication destination in the enterprise manager to get it monitored and then try to configure replication.

    Alternatively, you can try to configure replication using Avamar administrator GUI.

    Please refer to Avamar administration guide for more details about configuring replication :

    http://powerlink.emc.com/km/live1//en_US/Offering_Technical/Technical_Documentation/300-011-622.pdf

Dell Support Resources

Latest Solutions

View More