UNSOLVED

gauge1

updated

17 years ago

G

gauge1

17 Posts

0

728

July 9th, 2009 13:00

Moving internal usermapper from server_2 to server_3

We have an existing 4 Datamover NAS (NAS1). NAS1 server_2 is currently running the primary usermapper service. A second NAS (NAS2) is running a secondary usermapper that points to NAS1 server_2. We have a need to move the primary usermapper service from NAS1 server_2 as we want point NAS1 server_2 directly to Active Directory for testing purposes. Our plan is to stop the primary usermapper service on NAS1 server_2, designated NAS1 server_3 as the primary usermapper service, and then repoint NAS2 server_2 to NAS1 server_3. Are there any restrictions anyone is aware of that would prevent this? I haven't found any in the NAS documentation other than comments that server_2 is the default primary/secondary usermapper service unless otherwise configured. Thanks in advance.
  • Peter_EMC

    674 Posts

    268

    0

    Posted July 9th, 2009 23:00

    This depends on your environment

    Just stopping primary usrmapper on server_2 and starting server_3 as a primary usrmapper does not involve everything.

    f.e. the original primary usrmapper has its usrmapper database, will you migrate this to server_3???

    server_2 will still have its secmap, where all the already done mappings are stored. So even if you stop usrmapper from this server, the old secmap mapping is still there ....

    Secmap is always the first resource which will be used for resolving Group/User SIDs
  • gauge1

    17 Posts

    268

    0

    Posted July 14th, 2009 11:00

    We are planning to export/import the information. Are you saying that even with server_2 usermapper disabled that server_2 secmap databased would still be referenced for uid/gid/sid translations? Will a -remove -all against server_2 prevent this?

    server_usermapper server_2 -Export -user /tmp/user.server2.save
    server_usermapper server_2 -Export -group /tmp/grp.server2.save
    server_usermapper server_2 disable

    server_usermapper server_3 -remove -all
    server_usermapper server_3 -Import -user /tmp/user.server2.save
    server_usermapper server_3 -Import -group /tmp/grp.server2.save
    server_usermapper server_3 enable
  • Peter_EMC

    674 Posts

    268

    0

    Posted July 14th, 2009 23:00

    Are you saying that even with server_2 usermapper
    disabled that server_2 secmap databased would still
    be referenced for uid/gid/sid translations? Will a
    -remove -all against server_2 prevent this?


    No.
    Think of secmap as a cache of all already referenced or used uid/gids of this datamover.

    If you disable remove usrmapper from server_2, all datamovers will still have their secmap.
    Usrmapper will only be involved if secmap/local passwd/NIS/LDAP/AD (in this order) is unable to resolve a ID.

    Message was edited by:
    Peter