As it is necessary to adjust parameters of dispatch that mistakes in Celerra sent on mail (erors or critical). It is impossible to me. Prompt or give the reference to the documentation.
sure, if you want to do it using the CLI take a look at this manual:
Configuring Celerra Events and Notifications This technical module describes how to configure the Celerra Network Server to record and display various system events, such as errors, alerts, and commands to facilitate system administration and troubleshooting.
Rainer_EMC
6 Operator
•
8645 Posts
225
1
Posted February 4th, 2008 03:00
Configuring Celerra Events and Notifications
This technical module describes how to configure the Celerra Network Server to record and display various system events, such as errors, alerts, and commands to facilitate system administration and troubleshooting.
http://powerlink.emc.com/km/live1/en_US/Offering_Technical/Technical_Documentation/300-002-708_a03_elccnt_0.pdf
or Powerlink Home > Support > Technical Documentation and Advisories > Hardware/Platforms Documentation > Celerra Network Server > General Reference
If you want to use the Celerra Manager GUI (easier) its is the Events tab and its explained if you press the question-mark shaped help button