UNSOLVED

landog1

updated

14 years ago

L

landog1

1 Rookie

•

96 Posts

0

3576

June 26th, 2012 13:00

shrink or delete storage pool

We would like to use some or all of the disks associated with a Celerra storage pool for Clariion SAN.

Is there a good reference the steps needed to shrink or delete storage pools?

Thank you.

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    885

    1

    Posted June 26th, 2012 13:00

    First identify who is using which dvols

    Whereisfs or nas_disk/fs/.. are your friends

    See if you can free up complete dvols

    Use the forum search for details - this has been discussed here a couple of times

  • landog1

    1 Rookie

    •

    96 Posts

    885

    0

    Posted July 3rd, 2012 05:00

    I did not need to "shrink" the storage pool.  All that was necessary (after determining that the volumes were not used) was to run:  nas_disk -delete dvol

    Then on the Clariion side I was able to move the LUNs to a different storage group.

  • landog1

    1 Rookie

    •

    96 Posts

    885

    0

    Posted July 3rd, 2012 06:00

    I did have a support chat active when I did this, as I wanted to make sure it was done correctly.  I specifically asked about the -perm switch, and was told it was not needed.

    I wish EMC support read from the same playbook as you guys.

    But, thanks for your help.  I appreciate these forums.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    885

    0

    Posted July 3rd, 2012 06:00

    you always want to use -perm when you do that.