UNSOLVED
Mirrorview/A
Hi All,
We have 2 x CX3-10 running Flare Code 3.26.010.5.011; we are using MV/A to replicate from each other 5TB. I have configure 500GB in the Reserve Lun Pool. The replication is so slow, like a 10GB per day. So I check in the Reserve Lun Pool again and notice that there is no Luns allocated.....both CX3-10 has the 500GB in the Free Lun Pool area.
best regards
We have 2 x CX3-10 running Flare Code 3.26.010.5.011; we are using MV/A to replicate from each other 5TB. I have configure 500GB in the Reserve Lun Pool. The replication is so slow, like a 10GB per day. So I check in the Reserve Lun Pool again and notice that there is no Luns allocated.....both CX3-10 has the 500GB in the Free Lun Pool area.
best regards
bstoyanov_393481
45 Posts
438
0
Posted August 28th, 2008 04:00
Hi,
During the initial synchronization the copy process differs a bit from subsequent updates. Also the secondary image is not "gold copy" protected. That's why I think it is normal the Reserved LUN Pool to be only allocated and free.
When the initial sync is over and subsequent update is started you should see how much of the reserved LUN pool is used.
bstoyanov_393481
45 Posts
438
0
Posted August 27th, 2008 04:00
Is this during the initial synchronization or during some later update ?
What is the connection between the storages ?
Recently we made replication between CX3-20 and CX500 and 1TB was replicated in less than a day.