jmguillen

updated

18 years ago

J

jmguillen

1 Message

0

464

May 21st, 2009 12:00

Two hosts with the same name.

Hi,
We are replacing the hardware on one of our databases.
Both the old and the new server are fiber attached to a cx300.

We have (at least) two options:

A) Install the new server with a new name, attach it to the storage and rename it later to the original database server name. In this case how this will affect the host registration on the Clariion box?

B) Install the server with the same name (it will have a different IP address), register it to the cx300, do the database stuff and that's it. In this case, how will the host be registered on the Clariion box? Navisphere console shows hosts as name[IP address]. So maybe both hosts can be defined without problems?

As you can see we want to have the same server name after the hw migration....

And will help to our procedure having both servers connected to the storage and running at the same time.

I know that at the end of the day storage connectivity will work, but don't want to mess the host registration... as I did before ;)

BTW, we are using Navisphere agent 6.19 and the OS is Oracle Linux Enterprise Server 5.2

Any advice?

Juan Martin.
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    247

    0

    Posted May 22nd, 2009 05:00

    if i were doing this, i would bring the new system with its new name, perform your work and later on once the old system is out of the picture (will need to de-register from navisphere), i would update appropriate files according to this article emc66921, and restart navisphere agent. Worth case scenario you can always manually change host/ip address in Connectivity status on the fly without affecting host connectivity.