UNSOLVED

Ericldce

updated

13 years ago

E

Ericldce

35 Posts

0

147870

February 6th, 2014 11:00

system update tasks

I have OME 1.2.1. Everytime I try to run a system update task it fails. The copy portion is successful

Copied 3 of 3 packages to C:\Program Files
(x86)\Dell\SysMgt\Essentials\SystemUpdate\Packages on DURHAM-DELLOM.

however the task fails

The task failed for the target device.

Fail

 What's needed to make this work, the target machine's firewall is off, and the target is being inventorired fine.

Thanks

Eric

  • DELL-Rob C

    4 Apprentice

    •

    2843 Posts

    1132

    0

    Posted February 7th, 2014 08:00

    Hi there,

    Was this OME system recently upgraded.  Seems like the task could not acquire a target because the device group does not have an entry for that target. 

    Can you try:

    -        Restart All the OME services

    -        Reset IIS

    -        Try again

     

    Thx

    Rob

     

  • 1132

    0

    Posted February 11th, 2014 14:00

    Hello,

    I'm getting something similar with a fresh install of 1.2.0.3441 on Server 2012. It seems that tasks using the iDRAC method work fine but those that need OMSA fail each time with:

    Results:  File deploy command failed to execute with error message: Invalid combination of omfile and command.

    The box has been restarted a couple of times in between attempts. Any advice here would be appreciated, it is likely something obvious that I've missed!

    Thanks,

    Matt

  • DELL-Rob C

    4 Apprentice

    •

    2843 Posts

    1134

    0

    Posted February 12th, 2014 08:00

    Hi Matt,

    A few questions:

    What is the version of OMSA on the target?

    Also what is the DUP being pushed via OMSA? This will clarify the issue for us.

    Thanks,

    Rob

  • 1134

    0

    Posted February 12th, 2014 12:00

    Hi Rob,


    OMSA version is:

    Dell OpenManage Systems Management Software (64-Bit) Version 7.3.0

    (When I first started testing it was an earlier version and I upgraded to see if it would help -- still the same error on OMSA deployments though)

    The packages vary but all require OMSA for deployment.

    I did some further testing yesterday on another server and ran into the same message. Tried our local admin credentials and that seemed to get further (although some timeout errors on some) -- do spaces in usernames cause issues?

    Many thanks,
    Matt

  • DELL-Rob C

    4 Apprentice

    •

    2843 Posts

    1134

    0

    Posted February 13th, 2014 13:00

    ah, yeah, spaces in user name may cause trouble with omremote.exe...can you test with another account?

    Thx

    Rob

  • 1134

    0

    Posted February 13th, 2014 15:00

    Thanks Rob.

    Tried with another account, this one without spaces in either username and password. This allowed the tasks to complete (I get other errors but I think outside the scope of this thread).

    In summary:


    Username and Password both with spaces: "Results:  File deploy command failed to execute with error message: Invalid combination of omfile and command."

    Username and only Password with spaces - time out errors, deployment fails.

    Username and Password, no spaces - task completes.

    Kind regards,

    Matt

  • 1134

    0

    Posted March 5th, 2014 15:00

    Hi,

    Recently I have installed OME 1.2.1 at Windows 2008 server. In need to upgrade firmware packages to DELL servers. While I am trying to copy the firmware files to C:\Program Files (x86)\Dell\SysMgt\Essentials\SystemUpdate\Packages folder, I cant find SystemUpdate folder in Essentials. How will it happen? Did I missed anything?

  • 1134

    0

    Posted March 5th, 2014 21:00

    Hi Muthusamy,

    Thanks for your post.

    "System Udpate" folder gets created by its own when you create an Update task using OME. So during the System Update process, packages are downloaded from the selected source and saved under the “Packages” folder under the “Essentials>System update".

    So just browse to Manage>SystemUpdate>Non-Complaint, select the target device which requires firmware update and create an update task. Once you are done creating a task you must see "System Update" folder under C:\Program Files (x86)\Dell\SysMgt\Essentials\.

    You can also refer: http://en.community.dell.com/techcenter/extras/m/white_papers/20234619.aspx

    Hope this helps!

    Thanks

    Ranveer

     

  • 1134

    0

    Posted March 6th, 2014 11:00

    Thanks for your input. But I can't see my server under non-Complaint systems tab. It is available under Complaint Systems. How to move this from complaint to non-Complaint systems tab?

  • DELL-Pupul M

    2 Intern

    •

    1004 Posts

    934

    0

    Posted March 6th, 2014 11:00

    The presence of your server under compliant system means OME thinks that all the firmware versions are up to date. If you feel that is not the case, you will need to download the latest catalog based on which the comparison is made.

    Your OME server will need internet access if you want to download catalog from FTP or you can use a local repository as well through SUU or RM.

    You can download the new catalog from the system update page itself. Just click on "Select a catalog source" and choose from where you want to update the catalog and click 'Import Now".

    If your environment needs a proxy for internet access, you will need to provide your proxy details in the Preferences page.