1-3-2 is not in the table?

<ADMIN NOTE: Broken link has been removed from this post by Dell>

 What color are the Diagnostic Lights?

* Turn the PC off
* Unplug the power cord from the back of the PC
* Lay the PC down on its left side
* Remove the case cover
* Remove and reseat every card, cable, plug, and ram stick
* Close the case cover
* Reconnect the PC power cord
* Power the PC on

The 1-3-2 beepcode has historically been for the system not recognizing memory (on Dell systems at least).

I would start with that and reduce your memory to a single dimm and see if it gets you anywhere, if that dimm doesn't make a difference, replace it with 1 of the ones you pulled. Used this swapping idea to find which dimm may be causing your problem.

Hello DELL-Chris M

The Diagnositic Lights are 3 and 4 so according to the diagnotic code table the problem is "Memory modules are detected but a memory failure had occurred".  I guess I will reseat the memory dimm by dimm, yes?

Thanks

JDagenIL1017