UNSOLVED

billash

updated

22 years ago

B

billash

4 Posts

0

7740

March 10th, 2005 16:00

Cannot replace cover

I have a dimension 4700 desktop. The cover came off with no problem. When I try to replace it, the inserts appear to not line upwith the slots on the case. I don't want to force the issue. Has anyone had a similar experience or have a solution?
  • momrox

    14 Posts

    91

    0

    Posted March 10th, 2005 22:00

    I recently purchased a 4700 for my kids. (Less fighting over my PC!)  I took the cover off after trying how to get the thing off in the first place.  I installed a wireless card. To put the cover back on you have to pull that black L shaped handle in the back to make it stay.  It took me a bit to figure that one out, too.  Good luck!

    Fran

  • shesagordie

    12 Elder

    •

    46017 Posts

    91

    0

    Posted March 11th, 2005 00:00

  • billash

    4 Posts

    91

    0

    Posted March 11th, 2005 02:00

    I tried what you suggested. The problem seems to be that there is somewhat of a misfit; the little gizmos on the cover don't match with the slots on the case and thus the cover stops short of where  it belongs. it's not the latch that's the problem.
  • billash

    4 Posts

    91

    0

    Posted March 12th, 2005 18:00

    Problem is solved. The part that inserts into slot was slightly bent. A minor plier adjustment was all that was needed.
  • momrox

    14 Posts

    91

    0

    Posted March 13th, 2005 12:00

    I'm glad you able to get your cover back on.
    Fran